Preparation of the water jet machine after the production recovery
Peace of the world. Health for everyone. Wish everything would be resumed normally as soon as possible.
It is time for the water jet cutters to finish their holiday and devote themselves to busy jobs.
Consider they had a period of time not to work, Shuttle shares some suggestions for each user and let the water jet machine better to serve you:
1.Check the device’s integrity. It is strictly forbidden to connect the power on the device without determining safety.
2.Check the hydraulic oil from the oil box according to the oil meter to judge is it needed to add or change.
3.Check the filter elements. If they are not very dirty, clean them with water; otherwise, change a new one.
4.Check all wires, check their quality and connection.
5.Check the pump, the connection of the high-pressure tube.
6.Check the running structure of the X Y Z axis and its hydraulic oil. Add it or change it.
7.Clean the sludge and waste inside the cutting table, and full the water.
8.After the comprehensive detection, you can connect the water and power, and turn on the software.
9.Start the water jet cutting.
It is time for the water jet cutters to finish their holiday and devote themselves to busy jobs.
Consider they had a period of time not to work, Shuttle shares some suggestions for each user and let the water jet machine better to serve you:
1.Check the device’s integrity. It is strictly forbidden to connect the power on the device without determining safety.
2.Check the hydraulic oil from the oil box according to the oil meter to judge is it needed to add or change.
3.Check the filter elements. If they are not very dirty, clean them with water; otherwise, change a new one.
4.Check all wires, check their quality and connection.
5.Check the pump, the connection of the high-pressure tube.
6.Check the running structure of the X Y Z axis and its hydraulic oil. Add it or change it.
7.Clean the sludge and waste inside the cutting table, and full the water.
8.After the comprehensive detection, you can connect the water and power, and turn on the software.
9.Start the water jet cutting.